-
1 Reply
-
28
XP
47
Honor
To connect your Victron VE.Bus inverter/charger to a device such as a PC, for either configuration or status updates, you’ll need specific adapters and cables to establish a successful connection.
For configuration mode:
-
You’ll require an MK3-USB adapter. This device acts as a bridge between the VE.Bus port on your inverter/charger and the USB connection on your computer.
-
Along with the MK3-USB, you should use a standard RJ45 UTP cable, commonly known as an Ethernet patch or LAN cable. It’s crucial to use an industrially manufactured cable as hand-crimped cables often lead to connectivity issues. Even if a hand-crimped cable works for computer networks, it may not meet the quality needed for Victron products.
For status mode:
-
A VE.Bus Smart Dongle is used. This dongle connects to the VE.Bus port on the inverter/charger and allows Bluetooth connection to your device, enabling you to check the status wirelessly.
When connecting with an Android device, there’s an additional step:
-
You will need an OTG (On-The-Go) cable to convert the USB cable from the MK3-USB to the data port on your Android device. The type of OTG cable required depends on your device’s data port, which is typically a micro-USB or USB-C connection.
-
Note that the OTG adapter is not provided by Victron and must be sourced separately.
By ensuring you have the correct equipment and cables, you can set up your inverter/charger for configuration using a computer or check its status from your Android device with ease.
-
Log in to reply.